Transflo A 40 Series - Selection Guide

Home >> Pump Selection Guide

General Notes for Pump Selection
1	Identify the liquids you need to pump and determine their relative viscosities and corrosiveness.
2	Select the tubesets that are chemically compatible with the fluid you are pumping.
3	Match the diameter and length of the pump tubes to the dimensions of drums, tanks or other containers out of which you will be pumping. Pump length for standard 200 Ltr Barrel / Drum is 39".
4	Select drive motor either air or electric suitable for required Head and Flow Rate.

The following chart gives a quick look at our various Transflo Series Models.

Transflo Model	Motor HP	Weight	Pump Capacity		Liquid Examples
			Flow Rate	Max Head
Low Viscous Pump - Electric Driven
A 40 E / 0.5	0.5	8	70 LPM	8 Mtr	Chemicals
A 40 E / 0.75	1.0	8	80 LPM	12 Mtr	Oils
A 40 E / 1.5	1.5	8	100 LPM	18 Mtr	Oils
Low Viscous Pump - Air Driven
A 40 A / 0.3	0.3	6	70 LPM	5 Mtr	Chemicals, Solvents
A 40 A / 0.6	0.6	6	90 LPM	15 Mtr	Oils
High Viscous Pump - Electric Driven
A 40 E HV / 0.5	0.75 HP	18	22 Kg/Min	1 Bar	Glycerin
A 40 E HV / 1.0	1.0 HP	18	20 Kg/Min	1 Bar	Honey / Shampoo
A 40 E HV / 1.5	1.5 HP	24	15 Kg/Min	3 Bar	Resins
A 40 E HV / 2.0	2.0 HP	24	15 Kg/Min	3 Bar	Molasses
A 40 E HV / 3.0	3.0 HP	29	10 Kg/Min	3 Bar	Additives
A 40 E HV / 5.0	5.0 HP	35	10 Kg/Min	3 Bar	Glucose